System and opening types
Aluminium mullion/transom façade and skylight system, 60 mm face width.
Façades · Schüco aluminium system
Schüco FWS 60 is the 60 mm face-width aluminium mullion/transom façade system for façades and skylight areas, designed for larger units and higher glass loads than the 50 mm system. Different basic depths and a comprehensive cover-cap range support varied designs; a profile-integrated spandrel safety barrier serves floor-to-ceiling opening units. The passive house-certified FWS 60.SI variant uses an intelligent isolator system.
Availability and final specification to be confirmed with KR.
Spotlight on:
Published Schüco system characteristics for the Façade System FWS 60:
Aluminium mullion/transom façade and skylight system, 60 mm face width.
Façades and skylights; profile-integrated spandrel safety barrier; wide selection of pressure plates and cover caps incl. stainless steel; different profile depths.
Schüco window, door and sliding insert units; automated Schüco doors and sun shading; Integralmaster in FWS 50/60; CTB / CSB in and in front of FWS 50/60.
Bullet resistance is a specialist ballistic construction of the FWS 50/60 platform, not a property of the standard façade; Schüco publishes FB4 jointly for FWS 50 and FWS 60 in brochure P4123, without an EN 1522 reference.
Values are published Schüco system data. Final thermal, acoustic and security performance depends on glazing, hardware, configuration and project specification.
01 — Planning benefit
Aluminium mullion/transom façade and skylight system, 60 mm face width
Façades and skylights
Profile-integrated spandrel safety barrier
Wide selection of pressure plates and cover caps incl. stainless steel
Different profile depths
Integration of Schüco window, door and sliding insert units
02 — System integration
Schüco window, door and sliding insert units
Automated Schüco doors and sun shading
Integralmaster in FWS 50/60
CTB / CSB in and in front of FWS 50/60
Sälzer S1es-60 seamless combination
03 — Gallery
04 — Awards
Cradle to Cradle Certified Silver
05 — Technical information
Figures are published system maxima and minima. “Not published” means Schüco publishes no figure for that property; project values depend on configuration, glazing build-up and installation, and are confirmed by KR at tender.
| Face width (mm) | 60 |
|---|---|
| Profile depth (mm) | 50–250 (FWS 50/60 platform) |
| Max. unit size, W × H (mm) | Not published |
| Max. weight (kg) | Not published |
| Glazing thickness (mm) | triple glazing possible with high glass thicknesses via the comprehensive glass carrier system (no numeric limit published) |
| Thermal performance | Uf to 0.70 W/(m²K) with SI isolator, 0.88 W/(m²K) with HI isolator; FWS 60.SI passive house-certified incl. screw factor |
|---|---|
| Sound reduction | Not published |
| Watertightness | Not published |
| Air permeability | Not published |
| Wind load resistance | Not published |
| Burglar resistance | RC 3 (FWS 50/60 platform) |
|---|---|
| Blast resistance | not published for FWS 60; the Sälzer S1es-60 (60 mm inner/outer face width) reaches RC 5, FB7-NS and arena air-blast with up to 500 kg of explosives, project-specific certification to EPR4, and 'can be combined seamlessly with the Schüco FWS 60 series' |
| Bullet resistance | FB 4 (platform) |
| Fire and smoke | fire façade and SHEVS solutions on the FWS platform |
| Automation | integration of electrical components for automated Schüco doors and sun shading |
| Further features | profile-integrated spandrel safety barrier; reliable design of large glass loads via system components |
06 — Documentation
Access required Schüco publishes Façade System FWS 60 technical documentation behind a registered architect login. The files are not downloadable from this page.
KR holds current documentation as a Schüco fabrication and installation partner and will supply the relevant sheets for a nominated project — or arrange authorised access through Schüco's architect workplace.
07 — Specification texts
Specification summary for the Schüco Façade System FWS 60. The complete, tender-ready specification text is issued by KR for a nominated project.
08 — CAD data
Access required Schüco releases Façade System FWS 60 CAD sections and BIM objects only to registered architects through its architect workplace. No CAD or BIM files are hosted on this page.
KR can issue the relevant sections and details for a nominated project, or help set up authorised Schüco access for your practice.
09 — Brochures
Published Schüco literature covering the Façade System FWS 60. KR supplies current editions directly.
Current edition supplied by KR on request.
Current edition supplied by KR on request.
KR fabricates, installs and distributes the Schüco range Australia wide. Talk to our team about configurations, thresholds, glazing build-ups and site conditions.
Enquire with KR Back to Façades / Outdoor
Schüco is a registered trade mark of Schüco International KG. Values are indicative and depend on configuration, glazing and installation.